Pingyin · Jinan · Shandong
Dongyue · Jinan Compressor Factory
Jinan Compressor Factory Co., Ltd. (济南压缩机厂有限公司) dates its manufacturing history to 1974. Its current range separates mine equipment, industrial two-stage screw and mobile air supply, with receivers, air treatment, vacuum and station-control routes.
Company material describes design/production responsibility and key-parts provision. The national standards platform also names the company among drafting participants for plan 20250138-T-604, a revision concerning general-purpose oil-injected single-screw compressors. This participation is distinct from an individual product certificate or the architecture of every machine.
Match the working environment first
Mine screw, coal-mine protection and chemical protection are separate routes
DLGF · metal/non-metal mines
The DLGF12/8-75 page describes this application and belongs to the supplier's KA-labelled catalogue route. Select the actual mine duty and required qualification documents.
MLGF · coal-mine mobile route
The manufacturer groups mobile explosion-protected MLGF equipment under its separate MA-labelled route. Do not substitute a DLGF name for that complete model and application.
Gas/dust · chemical route
The chemical explosion-protected range is listed separately again. The operating environment, exact equipment marking and applicable model documents belong in the review.
DLGF12/8-75 · named mine reference
| Volume / pressure | 12 m³/min 0.8 MPa |
|---|---|
| Cooling / drive | Air cooling Direct coupling |
| Speed / voltage | 1485 rpm 380 V |
| Starting | Direct or star-delta |
| Weight | 1500 kg |
| L × W × H | 1950 × 1275 × 1620 mm Original entry: ±50 |
Confirm the current motor selection, delivery conditions and drawing. Match certificate holder, exact model, validity and operating scope to the required mine environment.
DLGF duty and qualification inputs →Industrial variable-demand station
LGFD-10/8Ⅱ-BP · a selected point for two-stage variable speed
| Motor / delivery | 45 kW 10 m³/min at 0.8 MPa |
|---|---|
| Cooling / voltage | Air cooling 380 V |
| Catalogue speed | 1500 rpm |
| Catalogue weight | 1480 kg |
| Catalogue L × W × H | 1800 × 1170 × 1500 mm |
Provide minimum/normal/peak demand and operating hours. Compare delivery and complete-package input at the same pressure and reference conditions, including usable control range and part-load operation.
The catalogue describes PM variable-speed motor/control and two-stage compression. Those terms do not establish a universal savings percentage for a new installation.
LGFD station scope and acceptance →
Air supply away from the electric grid
LGFY diesel mobile · define the tool and the site
| Volume / pressure | 26 m³/min field convention 2.1 MPa |
|---|---|
| Cooling | Air cooling |
| Weight | 3300 kg |
| L × W × H | 3100 × 1830 × 2480 mm |
Confirm the current delivery conditions and engine make/model, declared rating, emissions and ambient/altitude derating for the destination. The smaller LGFY-10/8-C reference's 75 kW power must not be assigned to this model.
Specify air pressure at the tool after hose losses, simultaneous demand, transport/lifting and service access. Wheels or a tow arrangement alone do not establish road approval or underground/hazardous-area suitability.
LGFY tool, engine and transport brief →Order the complete air supply, with clear service boundaries
Station configuration
Published project records include mine stations with 6000 V/10000 V configurations and air/water-cooled equipment, alongside construction applications. Review electrical and cooling scope for the selected installation.
Define receiver, dryer, filters, downstream losses, station controls and the pressure/air quality needed at the user. A catalogue's 380 V unit and a high-voltage station are separate offered configurations.
Inspection and ongoing support
The company describes maintenance/parts provision and rotor repair or exchange. Obtain current parts/overhaul scope, model/serial traceability, factory test procedures and installation/commissioning terms.
For remote monitoring, specify included functions, network and permissions, alarm response and offline protection. Agree the responsible support provider and destination service arrangements.
Start with the brief for your application
- Mine equipment
- Exact location/environment and operating class; required model-specific documents; pressure/flow, electrical supply, cooling, placement and protection.
- Factory station
- Minimum/normal/peak demand and hours; user pressure/air quality and losses; power, ambient and space; treatment, receiver and controls.
- Diesel mobile
- Tools and hoses, working pressure/duty cycle; engine/destination requirements, fuel, altitude/ambient; transport, lifting and maintenance access.
- Acceptance and handover
- Current offered model/revision, drawings and included auxiliaries; agreed delivery/input measurement, applicable documents, test/witnessing, commissioning and parts.
Dongyue procurement questions
Is DLGF the same as the coal-mine MLGF route?
The current supplier catalogue separates them. DLGF12/8-75 describes metal/non-metal mining; MLGF mobile explosion-protected coal-mine equipment has a different route. Match the exact offered model and required environment documents.
Can I compare two-stage machines using motor power alone?
Use delivery and complete-package input at the same pressure/reference conditions, with the actual demand profile and usable control range. Motor kW and broad savings headlines do not establish installed-system energy use.
Can the LGFY-10/8-C power be used for LGFY-26/21-C?
They are separate models. Obtain the actual engine make/model, declared rating and site derating for LGFY-26/21-C, together with its current delivery record.
What does drafting participation prove?
The standards platform records company participation in a revision plan. It is separate from an individual product performance test, safety approval or the architecture of every compressor.