Rotary screw
Sollant 11 kW rotary screw air compressor — Sollant Machinery (Linyi works)
Sollant 11 kW rotary screw air compressor · Sollant Machinery (Linyi works)
Datasheet
Product overview
Power: 11 kW · Pressure: 7–12 bar · selected configuration · Flow: Selected-pressure capacity to be agreed
Sollant's 11 kW rotary screw product page describes a stationary air package with pressure configured within 7–12 bar. It lists 400 kg and 1,150 × 820 × 1,130 mm. These values define the published package reference, but the page does not provide a capacity row at the selected pressure. Request that duty sheet before comparing it with another 11 kW machine.
The source says a frequency converter can be added. Agree the drive version and control range rather than assuming the existing fixed-screw catalog slug establishes the supplied drive. Its motor-protection wording is IP23/55; obtain the actual offered motor specification. The original gallery photograph carries an SLT11V marking and shows a manufacturer configuration example, not approval of the final order. Printed marks on the enclosure are not a substitute for current, applicable certificates.
Provide required flow and pressure at the air users, electrical supply, operating hours, load variation and installation environment. Ask for the selected arrangement, ventilation and servicing clearances, performance reference conditions and complete-package input. Itemize receiver, dryer, filters and drainage according to downstream quality requirements. Agree test records, commissioning, consumables and destination support with the order. General electricity-saving percentages do not establish performance for the buyer's actual demand profile.
| Catalog reference | SOLLANT-FIXED-SCREW |
|---|---|
| Machine | Rotary screw |
| Power | 11 kW |
| Working pressure | 7–12 bar · selected configuration |
| Published flow | Selected-pressure capacity to be agreed |
| Air quality | — |
| Duty | General industry |
| Supply | Not specified |
| Plant | Sollant Machinery (Linyi works) |
| Stationary rotary screw compressor | 11 kW |
| Published configurable pressure band | 7–12 bar |
| Mass | 400 kg |
| Dimensions | 1150 × 820 × 1130 mm |
| Drive | Fixed-speed or frequency-converter option to be agreed |
| Motor protection | Page states IP23/55; confirm the supplied motor |
| Note | No pressure-matched capacity row supplied on this product page |
| Note | Official gallery image marked SLT11V; final drive/version may differ |
| Note | Receiver, air treatment, drainage and installation scope to be itemized |
Plant
Sollant Machinery (Linyi works)
Linyi
The plant remains the seller. This desk issues the English duty sheet so quotes are comparable across clusters.
- SOLLANT-TWOSTAGE · 22 kW · SLTT-22V example
- SOLLANT-SLTDP · 37 kW engine · SLTDP-5/7
Specification pages
Specifying a Rotary screw duty
| Duty | Write on the RFQ |
|---|---|
| Compressor for laser cutting | Choose the air system from the laser maker's gas specification. The compressor motor rating and laser power do not, by themselves, determine the required pressure, flow or air quality. Identify whether the supply is for cutting assist gas, machine services or both before requesting a package. |
| Compressor for a textile factory | Jet looms and spinning do not share a pressure. Write the machine OEM’s bar(g) and the hall FAD, then 50 Hz voltage for most Asian mills. |
| Compressor for CNC machines | Machine tools need dry, stable 7–8 bar air. Size from the cell, not from a round kW number a vendor likes to sell. |
Same type
Related Rotary screw products
Compare the published product information for each manufacturer.
| Catalog ref. | Type | Power | Pressure | Flow | Air quality | Plant | |
|---|---|---|---|---|---|---|---|
 KAISHAN-LGKaishan LG stationary screw air compressors
|
Rotary screw | Selected LG model | Selected duty pressure | Selected flow and reference | — | Kaishan | RFQ |
| LIUTECH-LU-IILU II large two-stage oil-injected screw compressors | Rotary screw | 250–355 kW · overview band | Model-specific duty to be agreed | 45–72 m³/min · overview, not duty row | — | LIUTECH | RFQ |
 HANDE-TWOSTAGE-PMHD-EPM2T two-stage PM variable-speed screw compressors
|
Rotary screw | 37 kW · HD-EPM2T37 example | 0.5 / 0.8 / 1.0 / 1.25 MPa | 6.8 m³/min at 0.8 MPa · HD-EPM2T37 | — | Hande | RFQ |
 GANEY-OGOG / SOGFD air-cooled single-screw compressors
|
Rotary screw | 22 kW · SOGFD22 group | 0.7 / 0.8 / 1.0 / 1.25 MPa | 3.4 m³/min at 0.8 MPa · SOGFD22 | — | Ganey | RFQ |
 AE-APMAPM / APM-S permanent-magnet screw compressors
|
Rotary screw | 37 kW · APM37A / APM37A-S examples | — | Pressure-matched delivery to be agreed | — | Zhongshan AE Machinery | RFQ |
 AIRHORSE-OIL-INJECTEDAirHorse direct-drive oil-injected screw compressors
|
Rotary screw | 30–520 HP · published family range | Selected AHD model and duty to be agreed | Delivery at selected pressure / reference basis | — | AirHorse | RFQ |
Product information
Information reviewed 2026-10-08. Specifications apply only to the models and conditions stated.
SOLLANT-FIXED-SCREW: Voltage and frequency matter as much as bar. State both. Include the required operating conditions with your enquiry.
Issue RFQ