OG / SOGFD air-cooled single-screw compressors — GANEY / Guangdong Zhengli Precision Machinery

Datasheet

Product overview

Power: 22 kW · SOGFD22 group · Pressure: 0.7 / 0.8 / 1.0 / 1.25 MPa · Flow: 3.4 m³/min at 0.8 MPa · SOGFD22

The SOGFD air-cooled page belongs to GANEY's oil-injected single-screw route. The manufacturer explains OG as single screw, F as air cooling and D as a low-noise enclosure. It offers variable-speed configurations to request; define the actual drive and control range on the quotation.

The original table identifies SOGFD22 as a 22 kW group. Its pressure-specific rows are OGFD-3.8/7 at 0.7 MPa and 3.8 m³/min, OGFD-3.4/8 at 0.8 MPa and 3.4, OGFD-3.1/10 at 1.0 MPa and 3.1, and OGFD-2.8/12.5 at 1.25 MPa and 2.8. The common physical entry is G1, 550 kg and 1,450 × 700 × 1,100 mm. The original photograph is marked SOGFD22.

SOGFD37 is a separate 37 kW group with 6.4/6.1/5.3/4.7 m³/min at those same four pressures, G1¼, 800 kg and 1,675 × 820 × 1,230 mm. Obtain the offered test/reference conditions, complete-package input and approved drawing. The source supply reference is 380 V, three phase/four wire, 50 Hz; agree the actual export supply and electrical requirements.

The page also describes outlet-air temperature relative to ambient and an oil-content limit. Confirm those with the selected performance/treatment documents and set quality at the users. Itemize receiver, drying, filtration and drainage, plus maintenance access, consumables, commissioning and destination support. Avoid treating family savings or warranty marketing as the accepted commercial terms of every order.

Manufacturer: Guangdong Zhengli Precision Machinery Co., Ltd. (广东正力精密机械有限公司), brand GANEY, based in Ronggui, Shunde, Foshan. The company profile gives 1999 as its founding year.

GANEY's single-screw (OG) product centre currently lists separate routes: the S single-screw air-cooled series covered on this page, a permanent-magnet variable-speed single-screw series, the PHOGFD permanent-magnet two-stage single screw, a large-displacement single-screw series in air- and water-cooled versions, a low-pressure single-screw series and a medium-pressure single screw for laser cutting. The oil-free, water-lubricated single-screw route is the separate POGWFD product on this desk. Choose the route first, then request that route's own table; the SOGFD figures here do not apply to the other routes. Information checked against the manufacturer's product centre on 29 October 2026.

Catalog reference	GANEY-OG
Machine	Rotary screw
Power	22 kW · SOGFD22 group
Working pressure	0.7 / 0.8 / 1.0 / 1.25 MPa
Published flow	3.4 m³/min at 0.8 MPa · SOGFD22
Air quality	—
Duty	General industry
Supply	Not specified
Plant	GANEY / Guangdong Zhengli Precision Machinery
Architecture	Oil-injected single screw; SOGFD air-cooled enclosure
SOGFD22 motor	22 kW; outletG1; mass550 kg; 1450 ×700 ×1100 mm
OGFD-3.8/7	0.7 MPa,3.8 m³/min
OGFD-3.4/8	0.8 MPa,3.4 m³/min
OGFD-3.1/10	1.0 MPa,3.1 m³/min
OGFD-2.8/12.5	1.25 MPa,2.8 m³/min
Separate SOGFD37	37 kW;0.7/0.8/1.0/1.25 MPa at6.4/6.1/5.3/4.7 m³/min
SOGFD37	G1¼;800 kg;1675 ×820 ×1230 mm
Page supply reference	380 V,three-phase/four-wire,50 Hz
Note	OG=single screw;F=air cooling;D=low-noise enclosure; custom variable-speed version to be agreed
Note	Confirm performance basis, package input, electrical/export configuration and air-treatment scope