Fusheng SA oil-injected screw compressors — Fusheng

Datasheet

Product overview

Power: 55–200 kW, family envelope · Pressure: 7–12.5 bar, model-dependent · Flow: 8.3–37.5 m³/min, family envelope

The Fusheng mainland catalog's SA55–200 family is an oil-injected screw compressor route for industrial compressed-air systems. The published family bounds are 55–200 kW, 0.7–1.25 MPa working pressure and 8.3–37.5 m³/min delivery. They describe the range across models and conditions; they are not one pressure-matched duty point. The original product image shows an SA110 enclosure, whose exact rating must come from its selected model datasheet.

The SA introduction describes its screw rotor/body arrangement, cooling layout, oil separation/filtration, maintenance space and human-machine controls with diagnostics. For comparison, request the named model at the required pressure, its capacity reference and total package input, then control behaviour across normal, peak and low-load operation. A family efficiency statement does not quantify savings at the buyer's plant.

Define dryer, filtration and receiver scope, pressure dew point and point-of-use particle/oil requirements. State electrical supply, ambient temperature, altitude, ventilation and service space. Obtain offer-specific installation drawings and consumables/service intervals instead of treating a cabinet photograph as the delivery boundary.

For the enquiry, send pressure, demand profile, operating hours and existing-machine sequencing. Name the legal seller, assembly/test site, destination documentation, performance acceptance conditions and commissioning/parts responsibility. Keep the existing SA route while choosing the exact pressure-matched model through the enquiry.

Catalog reference	FUSHENG-SA
Machine	Rotary screw
Power	55–200 kW, family envelope
Working pressure	7–12.5 bar, model-dependent
Published flow	8.3–37.5 m³/min, family envelope
Air quality	—
Duty	General industry
Supply	Not specified
Plant	Fusheng
{"Catalog scope"	"SA55–200 family; bounds across different models", "Motor power envelope": "55–200 kW", "Working-pressure envelope": "0.7–1.25 MPa (7–12.5 bar)", "Delivery envelope": "8.3–37.5 m³/min; model/pressure pairing to confirm", "Original image": "SA110 enclosure; its rating is not inferred from family bounds", "Selection basis": "Named model, paired performance and total package input"}