Refrigeration
IOT ZW-0.8/16-24 ammonia compressor — vapour and unloading duty — Bengbu IOT Compressor
IOT ZW-0.8/16-24 ammonia compressor — vapour and unloading duty · Bengbu IOT Compressor
Datasheet
Product overview
Power: 15 kW motor · Pressure: 1.6→2.4 MPa;basis to agree · Flow: 0.8 m³/min nominal;not normal-flow conversion
IOT's ammonia-specific table gives ZW-0.8/16-24, nominal volumetric flow 0.8 m³/min, suction 1.6 MPa and delivery 2.4 MPa. The MPa columns do not state the gauge/absolute convention; confirm it and the volume reference before sizing or comparing with normal-flow gas compressors.
This Z-type is single-stage with two cylinders, direct drive and natural air cooling. It lists 730 rpm and a 15 kW motor at 380 V and 50 Hz. Approximate dimensions are 1600 × 800 × 1100 mm and weight 580 kg; source a configuration-specific drawing and weight for lifting, installation and maintenance access. The inlet-temperature entry is ≤40°C.
The website describes ammonia filling, tank transfer and liquid-ammonia unloading. Its project form asks for unloading demand in T/h, separate from the compressor's m³/min rating. Supply transfer quantity/time, source/receiving vessel pressures and temperatures, vapour/liquid conditions, line losses and gas-contact materials/sealing requirements. The nominal compressor volume alone does not establish an unloading time.
Cylinders and packing are described as non-lubricated; crankshaft, connecting rod and crosshead use lubricating oil. The motor table carries IP55 and DIIBT4 wording, which needs actual component documentation and a qualified project suitability review rather than an inferred whole-package certification. Ammonia-specific materials and acceptance requirements remain part of the offered design.
A stray hydrogen reference in the original generic paragraph is excluded from this ammonia description. Ask for offered performance, package input, P&ID, electrical/control/protection interfaces, actual tests and installation/removal drawing. Agree manuals, wear parts, commissioning, warranty and destination attendance. The original product-page image remains a catalogue example, not evidence of a visited production site or a supplied accessory list.
| Catalog reference | IOT-NH3 |
|---|---|
| Machine | Refrigeration |
| Power | 15 kW motor |
| Working pressure | 1.6→2.4 MPa;basis to agree |
| Published flow | 0.8 m³/min nominal;not normal-flow conversion |
| Air quality | — |
| Duty | Cold chain |
| Supply | Not specified |
| Plant | Bengbu IOT Compressor |
| Model | ZW-0.8/16-24 |
| Gas | Ammonia |
| Nominal flow | 0.8 m³/min;reference to agree |
| Suction / delivery | 1.6 /2.4 MPa;gauge/absolute convention not stated |
| Stages / cylinders | 1 /2 |
| Drive / cooling | Direct /natural air |
| Compressor speed | 730 rpm |
| Motor | 15 kW;380 V;50 Hz |
| Motor table designation | IP55;DIIBT4;actual documents to verify |
| Inlet temperature | ≤40°C |
| Approximate envelope / weight | 1600 × 800 × 1100 mm /580 kg |
| Process unloading | Required T/h and vessel conditions separate from compressor m³/min |
| Lubrication | Cylinders/packing non-lubricated;running gear lubricated |
Plant
Bengbu IOT Compressor
Bengbu
The plant remains the seller. This desk issues the English duty sheet so quotes are comparable across clusters.
Specification pages
Specifying a Refrigeration duty
| Duty | Write on the RFQ |
|---|---|
| Refrigeration screw compressor manufacturers in China | A refrigeration screw compressor is selected for a refrigerant and operating conditions. Start with required cooling capacity, evaporating and condensing temperatures, electrical supply and the system arrangement. An air-compressor pressure rating or a motor nameplate alone cannot define this duty. |
Same type
Related Refrigeration products
Compare the published product information for each manufacturer.
| Catalog ref. | Type | Power | Pressure | Flow | Air quality | Plant | |
|---|---|---|---|---|---|---|---|
 BINGSHAN-REF-COMPBingshan industrial refrigeration screw compressor enquiries
|
Refrigeration | — | — | — | — | Bingshan Cold & Heat | RFQ |
 VOCKE-V11Vocke V11 single-stage semi-hermetic screw refrigeration series
|
Refrigeration | — | — | — | — | Vocke | RFQ |
 BITZER-ECOLINEECOLINE semi-hermetic piston refrigeration
|
Refrigeration | — | — | — | — | BITZER | RFQ |
| MCQUAY-HSMcQuay semi-hermetic single-screw refrigeration selection | Refrigeration | Selected compressor input required | Refrigerant operating envelope required | Refrigeration duty; not air FAD | — | McQuay | RFQ |
 WULENG-SCREW-REFWuleng S-series screw refrigeration compressors
|
Refrigeration | Select refrigerant and duty | Refrigeration-duty selection | 3512–9059 m³/h theoretical displacement | — | Wuhan New World | RFQ |
 BINGSHAN-REF-PACKAGEBingshan industrial refrigeration and LSVLGF glycol-system enquiries
|
Refrigeration | — | — | — | — | Bingshan Cold & Heat | RFQ |
Product information
Information reviewed 2026-10-08. Specifications apply only to the models and conditions stated.
IOT-NH3: Voltage and frequency matter as much as bar. State both. Include the required operating conditions with your enquiry.
Issue RFQ