Centrifugal

DCL centrifugal chillers and magnetic-bearing selections — Moon-Tech

DCL centrifugal chillers and magnetic-bearing selections · Moon-Tech

DCL centrifugal chillers and magnetic-bearing selections — official catalog illustration
DCL centrifugal chillers and magnetic-bearing selections — manufacturer catalog illustration

Datasheet

Product overview

Power: 300–2000 RT · DCL single head · Pressure: Chilled water 12 / 7°C · Flow: Cooling water 32 / 37°C · DCL

Moon-Tech's HVAC catalog presents DCL centrifugal chillers as a Dunham-Bush product line. The DCL page lists a single-head cooling range of 300–2000 RT and a twin-head range of 600–4000 RT, with entering/leaving chilled water at 12/7°C and cooling water at 32/37°C. RT describes cooling capacity rather than motor power or compressed-air delivery. Tie the offered chiller to its legal seller, brand, assembly location and current model documentation.

The DCL description identifies HFC-134a refrigerant and CCS TOUCH controls, with ice-storage and heat-recovery functions available for selection. Specify which functions the quotation includes and request the current refrigerant and destination-compliance documents. The catalog range is not a guarantee of the selected machine's performance at other water temperatures.

A separate magnetic-bearing centrifugal chiller page lists 100–900 RT, with 12/7°C chilled water and 30/35°C cooling water. It describes two-stage compression, magnetic bearings, direct drive and variable-speed operation. This alternative has different cooling-water conditions from DCL; compare both at an agreed duty. Its separate heating-duty entries are not cooling-capacity ratings.

For a project, send peak and part-load cooling requirements, entering/leaving water temperatures, water flow and quality, electrical supply, site layout and redundancy. Obtain full/part-load input data, pressure drops, stable operating range, control/BMS interfaces and installation/service access. Itemise tower or other heat-rejection equipment, pumps, treatment, controls, commissioning and spares separately from the chiller supply.

Catalog referenceMOON-CENTRI
MachineCentrifugal
Power300–2000 RT · DCL single head
Working pressureChilled water 12 / 7°C
Published flowCooling water 32 / 37°C · DCL
Air quality—
DutyCold chain
SupplyNot specified
PlantMoon-Tech
Product lineDunham-Bush in Moon-Tech's HVAC catalog
DCL single-head cooling envelope300–2000 RT
DCL twin-head cooling envelope600–4000 RT
DCL chilled-water entering/leaving12 / 7°C
DCL cooling-water entering/leaving32 / 37°C
DCL listed refrigerantHFC-134a
DCL controls describedCCS TOUCH
DCL heat-recovery/ice-storage functionsConfirm offered option
Separate magnetic-bearing chiller cooling envelope100–900 RT
Magnetic-bearing chilled-water entering/leaving12 / 7°C
Magnetic-bearing cooling-water entering/leaving30 / 35°C
Magnetic-bearing architectureTwo-stage, variable-speed, oil-free bearing arrangement
QualificationRT is cooling capacity; family envelopes do not specify motor or water-flow ratings
Required offerFull/part-load duty, water flow, pressure drop, motor input, refrigerant and package drawing
ImageOriginal DCL family illustration

Plant

Moon-Tech

Yantai (industrial refrigeration OEM)

The plant remains the seller. This desk issues the English duty sheet so quotes are comparable across clusters.

Specification pages

Specifying a Centrifugal duty

All spec pages
DutyWrite on the RFQ
Compressor for wastewater treatment Most aeration trains want low-pressure blowers. If this RFQ is actually 7–8 bar plant air for valves and instruments, say so — it is a different machine from a maglev blower.
Centrifugal compressor manufacturers in China Centrifugal machines are duty-built. A 250 kW “centrifugal compressor China” RFQ without gas, suction and discharge pressure cannot be quoted.

Same type

Related Centrifugal products

Compare the published product information for each manufacturer.

Full Centrifugal list
Catalog ref.TypePowerPressureFlowAir qualityPlant
JTL-INDUSTRIAL-AIR JTL JE centrifugal air compressors and JED single-stage range JTL-INDUSTRIAL-AIRJTL JE centrifugal air compressors and JED single-stage range Centrifugal JE6000: 355–800 kW · configuration range JE: 2.2–10.5 barG · select operating point JE6000: 80–130 m³/min · reference basis to agree — Jintongling RFQ
HANWHA-CENTRI Hanwha SM / SM100 Pro centrifugal air compressor selections HANWHA-CENTRIHanwha SM / SM100 Pro centrifugal air compressor selections Centrifugal SM2100 150–335; SM3100 Pro 250–600 kW SM2100 5.0–11.4 bar(A); Pro duty to select SM2100 1400–3550; Pro 3300–5690 m³/h — Hanwha Power Shanghai — compressor sales and service RFQ
TLINGTE-TI Turbo-Tech Ti centrifugal air and nitrogen compressors TLINGTE-TITurbo-Tech Ti centrifugal air and nitrogen compressors Centrifugal Driver selected to duty 0.06–1.60 MPa(G), family envelope 1200–24000 Nm³/h, family envelope — Turbo-Tech RFQ
HYTP-ISOTHERMAL-AIR Hangyang single-shaft isothermal main-air compressors HYTP-ISOTHERMAL-AIRHangyang single-shaft isothermal main-air compressors Centrifugal Motor or steam turbine;duty-specific Selected main-air delivery duty ASU scale below40,000 Nm³/h;not air flow — Hangyang Turbine RFQ
IHI-SULLAIR-TX IHI-Sullair TX centrifugal air — 4–9 barg series selection IHI-SULLAIR-TXIHI-Sullair TX centrifugal air — 4–9 barg series selection Centrifugal TX series:150–425 kW TX series:4–9 barg Offered model flow/reference required — IHI-Sullair RFQ
SHAANGU-E Shaangu E horizontal-split process centrifugal compressors SHAANGU-EShaangu E horizontal-split process centrifugal compressors Centrifugal Selected train driver/input to agree Actual gas operating envelope required Project-specific flow/map and reference — Shaangu RFQ

MOON-CENTRI: State the refrigerant, cooling duty, thermal or water conditions, electrical supply and package scope for a project selection.

Issue RFQ