Rotary screw

Yishan DLGF electric two-stage PM VSD mining screw compressors — Shaanxi Yishan Compressor — Xianyang

Yishan DLGF electric two-stage PM VSD mining screw compressors · Shaanxi Yishan Compressor — Xianyang

Yishan DLGF electric two-stage PM VSD mining screw compressors — official catalog illustration
Yishan DLGF electric two-stage PM VSD mining screw compressors — manufacturer catalog illustration

Datasheet

Product overview

Power: 110 / 280 kW motor — examples · Pressure: 0.8 MPa — two table examples · Flow: 23 / 50 m³/min — basis to confirm

Yishan's DLGF mining series is an electric, two-stage permanent-magnet variable-speed screw compressor family. It is not a diesel portable compressor. The official table lists DLGF23/8-110B at 23 m³/min, 0.8 MPa and 110 kW motor power, and DLGF50/8-280B at 50 m³/min, 0.8 MPa and 280 kW. Both rows specify two-stage compression, direct drive and 1480 r/min. The flow reference and gauge/absolute pressure basis need confirmation; the listed motor rating is not measured total electrical package input.

The literature describes PM drive, variable-frequency PLC control, two-stage compression and filtration. Its KA discussion concerns non-coal underground and metal/non-metal mining equipment. A small certificate collage is not enough to verify the current certificate numbers, validity or exact ordered model coverage. Obtain current approval documents matched to the machine and intended site, and the destination mine's acceptance requirements. A KA logo, mobile arrangement or general tunnel use does not establish coal-mine explosion-proof suitability.

For a mine air-supply enquiry, identify the mine type and installation location, environment and hazardous-area classification, electrical supply/protection, required use-point pressure and simultaneous tool airflow, cooling and ventilation, altitude, access/transport and condensate/oil handling. Establish the actual selected motor/controller, controls and shutdowns, receiver/piping scope, maintenance clearances, commissioning and inspection records. Energy-saving claims need an agreed load profile and measured package performance rather than a generic percentage.

Catalog referenceYISHAN-MINE
MachineRotary screw
Power110 / 280 kW motor — examples
Working pressure0.8 MPa — two table examples
Published flow23 / 50 m³/min — basis to confirm
Air quality—
DutyConstruction
SupplyNot specified
PlantShaanxi Yishan Compressor — Xianyang
Family / driverDLGF electric PM VSD screw; not diesel
DLGF23/8-110B23 m³/min, 0.8 MPa, 110 kW motor; DN65; 2400×1500×1760 mm
DLGF50/8-280B50 m³/min, 0.8 MPa, 280 kW motor; DN100; 3500×2000×2100 mm
Both example rowsTwo-stage, direct drive, 1480 r/min listed
Reference conditionsFull volume-test and pressure basis to confirm
Mine documentationExact model, manufacturer/site, validity and destination requirements
KA scopeLiterature discusses non-coal/metal/non-metal mine use; no universal explosion-proof claim
ImageOriginal manufacturer DLGF50/8-280B product image; exact configuration to confirm

Plant

Shaanxi Yishan Compressor — Xianyang

Xianyang

The plant remains the seller. This desk issues the English duty sheet so quotes are comparable across clusters.

Specification pages

Specifying a Rotary screw duty

All spec pages
DutyWrite on the RFQ
How to specify an air compressor If the RFQ only says “compressor, China”, a plant cannot price it. Start with architecture, then the duty point, then the papers.
75 kW 8 bar rotary screw compressor 75 kW at 8 bar(g) is a common plant-air point. FAD is not a brochure range — it is the flow at that pressure, after the cooler, for the voltage you actually run.
110 kW 10 bar rotary screw compressor 10 bar(g) is not 8 bar with a different sticker. FAD falls as pressure rises. Write 110 kW and 10 bar together, then the flow you need at that point.

Same type

Related Rotary screw products

Compare the published product information for each manufacturer.

Full Rotary screw list
Catalog ref.TypePowerPressureFlowAir qualityPlant
KAISHAN-LG Kaishan LG stationary screw air compressors KAISHAN-LGKaishan LG stationary screw air compressors Rotary screw Selected LG model Selected duty pressure Selected flow and reference — Kaishan RFQ
LIUTECH-LU-IILU II large two-stage oil-injected screw compressors Rotary screw 250–355 kW · overview band Model-specific duty to be agreed 45–72 m³/min · overview, not duty row — LIUTECH RFQ
SOLLANT-FIXED-SCREW Sollant 11 kW rotary screw air compressor SOLLANT-FIXED-SCREWSollant 11 kW rotary screw air compressor Rotary screw 11 kW 7–12 bar · selected configuration Selected-pressure capacity to be agreed — Sollant RFQ
HANDE-TWOSTAGE-PM HD-EPM2T two-stage PM variable-speed screw compressors HANDE-TWOSTAGE-PMHD-EPM2T two-stage PM variable-speed screw compressors Rotary screw 37 kW · HD-EPM2T37 example 0.5 / 0.8 / 1.0 / 1.25 MPa 6.8 m³/min at 0.8 MPa · HD-EPM2T37 — Hande RFQ
GANEY-OG OG / SOGFD air-cooled single-screw compressors GANEY-OGOG / SOGFD air-cooled single-screw compressors Rotary screw 22 kW · SOGFD22 group 0.7 / 0.8 / 1.0 / 1.25 MPa 3.4 m³/min at 0.8 MPa · SOGFD22 — Ganey RFQ
AE-APM APM / APM-S permanent-magnet screw compressors AE-APMAPM / APM-S permanent-magnet screw compressors Rotary screw 37 kW · APM37A / APM37A-S examples — Pressure-matched delivery to be agreed — Zhongshan AE Machinery RFQ

YISHAN-MINE: Voltage and frequency matter as much as bar. State both. Include the required operating conditions with your enquiry.

Issue RFQ