What FAD should I write for 75 kW / 8 bar?
Do not copy a typical 12–13 m³/min figure onto the PO. Ask the plant for FAD at 8 bar(g) on the voltage and cooling you will run, after the aftercooler.
Parameter duty
75 kW 8 bar rotary screw compressor
75 kW at 8 bar(g) is a common plant-air point. FAD is not a brochure range — it is the flow at that pressure, after the cooler, for the voltage you actually run.
What belongs on the RFQ
Same sheet, matching plants
A 75 kW oil-injected screw on 8 bar(g) is usually a general-industry package: receiver, dryer and a stated FAD at the working pressure. Chinese plants publish series that cover this point, but they do not all publish the same FAD, cooling or starter. CompressorB2B does not invent a SKU to fill the gap.
What belongs on the RFQ is the duty, not the catalogue title. State 75 kW or the site kW limit, 8 bar(g) working pressure, required FAD at 8 bar, 50 or 60 Hz, voltage, air-cooled or water-cooled, fixed speed or VSD, and the destination port. ISO 8573-1 class only if the process needs it.
One English sheet goes to listed plants whose published series can hold this architecture. Quotes stay with the plant. The plant remains the seller.
- Working pressure 8 bar(g), not a 7–13 bar band with no duty point
- Required FAD at 8 bar(g) — confirm, do not copy a brochure
- 75 kW motor or a site kW cap
- 50 / 60 Hz and voltage
- Fixed speed or VSD, air or water cooled
- Quantity, FOB China port or CIF named port
Listings below are Chinese manufacturing plants drawn from public factory data and files we hold. A row is not exclusive agency, not a “verified factory” badge, and not a claim the plant appointed CompressorB2B. Plants that finish onboarding receive RFQs in the factory desk.
Matching plants
Match pool — published rows only
The plant remains the seller. Quotes are comparable because the RFQ is the same sheet.
| Plant | Cluster | Specialty | Documents | Export |
|---|---|---|---|---|
Baosi
Ningbo
|
Ningbo | Screw air-ends · Oil-injected/oil-free screw · Process gas |
On RFQ
|
Export ready |
Denair
Shanghai
|
Shanghai | Screw · Oil-free · Centrifugal |
TUV
|
Export ready |
Fusheng
Shanghai
|
Shanghai | Oil-injected/oil-free screw · Piston · Centrifugal (FS-Elliott) |
ISO 9001CEAPI
|
Export ready |
| Hanbell Shanghai | Shanghai | Screw air-ends · Refrigeration screw · Oil-free scroll |
On RFQ
|
Export ready |
Jaguar
Xiamen
|
Xiamen | PM VSD screw · Oil-free · Piston |
On RFQ
|
Export ready |
Jufeng
Wuxi
|
Wuxi | Oil-injected/oil-free screw · Laser-cutting packages · Booster |
ISO 8573CEASMETUVAPI
|
Export ready |
Kaishan
Shanghai
|
Shanghai | Screw · Portable/diesel screw · Centrifugal |
On RFQ
|
Export ready |
SCR
Shanghai
|
Shanghai | PM VSD screw · Oil-free screw/scroll · Two-stage |
CETUVAPI
|
Export ready |
Seize Air
Shanghai
|
Shanghai | PM VSD screw · Two-stage · Low-pressure |
CCC
|
On RFQ |
Xinran
Shanghai
|
Shanghai | Screw · Oil-free · Centrifugal |
On RFQ
|
Export ready |
Success Engine
Shanghai
|
Shanghai | Oil-injected screw · Oil-free · Centrifugal |
On RFQ
|
Export ready |
Xiya
Wuxi
|
Wuxi | Oil-free dry screw · Two-stage PM VSD · Portable |
API
|
On RFQ |
Published series
Catalog rows — not invented SKUs
Where a factory published a series, it is listed. Empty kW / FAD cells are confirm-on-RFQ.
| Model | Type | Power | Pressure | FAD | Air quality | Plant | |
|---|---|---|---|---|---|---|---|
| KAISHAN-LGLG oil-injected rotary screw | Rotary screw | 7.5–400 kW | 7–13 bar(g) | on RFQ | — | Kaishan | RFQ |
| BAOSI-BLTBLT packaged oil-injected screw | Rotary screw | on RFQ | 7–13 bar(g) | on RFQ | — | Baosi | RFQ |
| BAOSI-AIRENDScrew air-ends (OEM) | Rotary screw | on RFQ | on RFQ bar(g) | on RFQ | — | Baosi | RFQ |
| HANBELL-AAAA series screw air-ends | Rotary screw | on RFQ | on RFQ bar(g) | on RFQ | — | Hanbell | RFQ |
| SCR-PM-VSDPM VSD oil-injected screw | Rotary screw | on RFQ | 7–10 bar(g) | on RFQ | — | SCR | RFQ |
| XINLEI-PMPM VSD screw | Rotary screw | on RFQ | 7–13 bar(g) | on RFQ | — | Xinlei | RFQ |
| FUSHENG-SASA oil-injected screw | Rotary screw | on RFQ | 7–13 bar(g) | on RFQ | — | Fusheng | RFQ |
| XIYA-PMTwo-stage PM VSD screw | Rotary screw | on RFQ | on RFQ bar(g) | on RFQ | — | Xiya | RFQ |
| SE-SCREWOil-injected screw | Rotary screw | on RFQ | 7–13 bar(g) | on RFQ | — | Success Engine | RFQ |
| DENAIR-SCREWOil-injected screw | Rotary screw | on RFQ | 7–13 bar(g) | on RFQ | — | Denair | RFQ |
| JAGUAR-PMPM VSD screw | Rotary screw | on RFQ | 7–13 bar(g) | on RFQ | — | Jaguar | RFQ |
| JUFENG-SCREWOil-injected screw | Rotary screw | on RFQ | 7–13 bar(g) | on RFQ | — | Jufeng | RFQ |
FAQ
75 kW 8 bar rotary screw compressor — buyer questions
Is this a product SKU?
No. This page is a duty. Matching rows are published plant series. Missing nameplate fields stay “confirm on RFQ”.
Who sells the machine?
The manufacturing plant. CompressorB2B writes the English sheet and routes it. We do not take the PO or the funds.
75 kW 8 bar rotary screw compressor: Voltage and frequency matter as much as bar. Typical first reply: 1–2 working days after the plant confirms it can hold the duty.
Issue RFQ