Rotary screw
Oudefeng ODF-10A/0.8 belt-driven fixed-speed screw compressor — Jufeng Machinery
Oudefeng ODF-10A/0.8 belt-driven fixed-speed screw compressor · Jufeng Machinery
Datasheet
Product overview
Oudefeng ODF-10A/0.8 belt-driven fixed-speed screw compressor from Jufeng Machinery
Oudefeng is a product route in Jufeng's current Chinese range. The ODF-10A/0.8 page specifically documents a belt-driven fixed-speed screw machine; the same ODF numbering also appears in direct-drive and PM routes, so use the full construction and configuration designation.
Its technical table pairs 7.5 kW motor power with 1.1 m³/min exhaust volume at 0.8 MPa. It lists 380 V / 50 Hz, air cooling, star-delta starting, G3/4 outlet, 800 × 700 × 950 mm length × width × height and 220 kg machine weight. Obtain current drawing/revision and delivery reference/test conditions rather than treating these entries as a guaranteed rating for a different ODF-10A configuration.
The published configuration includes a controller, inlet and minimum-pressure valves, pressure/temperature sensing, filtration and belt drive. Require the actual bill of materials and the belt inspection, tension/alignment, replacement and access requirements. Separate the 7.5 kW motor entry from complete-package electrical input, including auxiliaries.
Define demand and working pressure, starting/electrical constraints, ambient/cooling, receiver and dryer/filter scope, installation and maintenance access. Agree acceptance measurements at the selected duty, supplied safety/installation documentation, commissioning and service parts. Cabinet markings are not independent evidence of a current certificate or an application-specific air-quality result.
| Catalog reference | OUDEFENG-BELT |
|---|---|
| Machine | Rotary screw |
| Power | — |
| Working pressure | — |
| Published flow | — |
| Air quality | — |
| Duty | General industry |
| Supply | Not specified |
| Plant | Jufeng Machinery |
| Exact reference | ODF-10A/0.8 belt-driven fixed-speed screw |
| Listed motor power | 7.5 kW |
| Published exhaust volume / pressure | 1.1 m³/min at 0.8 MPa |
| Electrical / starting | 380 V / 50 Hz; star-delta |
| Cooling / outlet | Air cooling; G3/4 |
| Envelope L × W × H | 800 × 700 × 950 mm |
| Listed weight | 220 kg |
| Configuration | Belt drive with controller, valves and pressure/temperature sensing |
| Selection | Current model revision/BOM, delivery conditions, treatment and maintenance access |
Plant
Jufeng Machinery
Wuxi
The plant remains the seller. This desk issues the English duty sheet so quotes are comparable across clusters.
Specification pages
Specifying a Rotary screw duty
| Duty | Write on the RFQ |
|---|---|
| 75 kW 8 bar rotary screw compressor | 75 kW at 8 bar(g) is a common plant-air point. FAD is not a brochure range — it is the flow at that pressure, after the cooler, for the voltage you actually run. |
| 110 kW 10 bar rotary screw compressor | 10 bar(g) is not 8 bar with a different sticker. FAD falls as pressure rises. Write 110 kW and 10 bar together, then the flow you need at that point. |
| 22 kW VSD screw compressor | 22 kW VSD is a flow band, not a single nameplate FAD. The plant needs min/max flow at the working pressure, or it will quote a fixed-speed machine with an inverter sticker. |
Same type
Related Rotary screw products
Compare the published product information for each manufacturer.
| Catalog ref. | Type | Power | Pressure | Flow | Air quality | Plant | |
|---|---|---|---|---|---|---|---|
 KAISHAN-LGKaishan LG stationary screw air compressors
|
Rotary screw | Selected LG model | Selected duty pressure | Selected flow and reference | — | Kaishan | RFQ |
| LIUTECH-LU-IILU II large two-stage oil-injected screw compressors | Rotary screw | 250–355 kW · overview band | Model-specific duty to be agreed | 45–72 m³/min · overview, not duty row | — | LIUTECH | RFQ |
 SOLLANT-FIXED-SCREWSollant 11 kW rotary screw air compressor
|
Rotary screw | 11 kW | 7–12 bar · selected configuration | Selected-pressure capacity to be agreed | — | Sollant | RFQ |
 HANDE-TWOSTAGE-PMHD-EPM2T two-stage PM variable-speed screw compressors
|
Rotary screw | 37 kW · HD-EPM2T37 example | 0.5 / 0.8 / 1.0 / 1.25 MPa | 6.8 m³/min at 0.8 MPa · HD-EPM2T37 | — | Hande | RFQ |
 GANEY-OGOG / SOGFD air-cooled single-screw compressors
|
Rotary screw | 22 kW · SOGFD22 group | 0.7 / 0.8 / 1.0 / 1.25 MPa | 3.4 m³/min at 0.8 MPa · SOGFD22 | — | Ganey | RFQ |
 AE-APMAPM / APM-S permanent-magnet screw compressors
|
Rotary screw | 37 kW · APM37A / APM37A-S examples | — | Pressure-matched delivery to be agreed | — | Zhongshan AE Machinery | RFQ |
OUDEFENG-BELT: Voltage and frequency matter as much as bar. State both. Include the required operating conditions with your enquiry.
Issue RFQ