Rotary screw
SE direct-driven oil-injected screw compressors — Success Engine
SE direct-driven oil-injected screw compressors · Success Engine
Datasheet
Product overview
Power: 22 kW · SE22A-8/D · Pressure: 8 bar · SE22A-8/D · Flow: 3.6 m³/min at 8 bar
The SE direct-driven oil-injected screw range transfers motor output to the airend through a flexible coupling. Its catalog separates pressure-specific models. SE22A-8/D lists 22 kW / 30 hp and 3.6 m³/min at 8 bar, with an Rp 1 1/4 outlet, 1300 × 860 × 1340 mm dimensions and 630 kg weight. The original image represents the 22–30 kW family rather than proving a serial-number-specific configuration.
SE30A-8/D lists 30 kW and 5.0 m³/min at 8 bar, with 1450 × 860 × 1340 mm dimensions and 690 kg weight. For the larger 75 kW pair, SE75A-8/D lists 13.0 m³/min at 8 bar and SE75A-10/D lists 10.9 m³/min at 10 bar. Both share the catalog's 2000 × 1200 × 1585 mm and 1580 kg entries. Specify the pressure suffix and capacity together.
The manufacturer describes removable service doors, air or water cooling, PLC protective alarms and a 485 interface using MODBUS. Confirm the offered cooling route, electrical supply, communication registers and station sequencing. Motor protection details do not establish the enclosure protection of the entire package, and a direct coupling does not eliminate the compressor's power consumption.
For installation, obtain the current outline and service-clearance drawing. An air-cooled selection needs a heat-removal and intake-air plan; a water-cooled selection needs water flow, inlet temperature, quality and pressure. Agree the delivery reference and total package input at the operating duty, then itemise dryer, filtration, receiver, drains and commissioning scope separately.
| Catalog reference | SE-SCREW |
|---|---|
| Machine | Rotary screw |
| Power | 22 kW · SE22A-8/D |
| Working pressure | 8 bar · SE22A-8/D |
| Published flow | 3.6 m³/min at 8 bar |
| Air quality | — |
| Duty | General industry |
| Supply | Not specified |
| Plant | Success Engine |
| Reference | SE22A-8/D |
| Motor rating | 22 kW / 30 hp |
| Air flow | 3.6 m³/min at 8 bar |
| Drive | Flexible direct coupling |
| Outlet | Rp 1 1/4 |
| Dimensions L × W × H | 1300 × 860 × 1340 mm |
| Weight | 630 kg |
| SE30A-8/D | 30 kW; 5.0 m³/min at 8 bar; 1450 × 860 × 1340 mm; 690 kg |
| SE75A-8/D | 75 kW; 13.0 m³/min at 8 bar |
| SE75A-10/D | 75 kW; 10.9 m³/min at 10 bar |
| SE75 listed dimensions | 2000 × 1200 × 1585 mm; weight 1580 kg |
| Cooling | Air-cooled or water-cooled arrangement to be specified |
| Control | PLC protection and 485/MODBUS interface described; confirm offered configuration |
| Flow qualification | Obtain delivery reference and test conditions |
| Image | Original manufacturer 22–30 kW family illustration |
Plant
Success Engine
Shanghai
The plant remains the seller. This desk issues the English duty sheet so quotes are comparable across clusters.
Specification pages
Specifying a Rotary screw duty
| Duty | Write on the RFQ |
|---|---|
| 110 kW 10 bar rotary screw compressor | 10 bar(g) is not 8 bar with a different sticker. FAD falls as pressure rises. Write 110 kW and 10 bar together, then the flow you need at that point. |
| 22 kW VSD screw compressor | 22 kW VSD is a flow band, not a single nameplate FAD. The plant needs min/max flow at the working pressure, or it will quote a fixed-speed machine with an inverter sticker. |
| 13 bar rotary screw compressor | 13 bar(g) is a laser and textile pressure, not a general 8 bar plant. Write FAD at 13 bar and the kW the site can feed. |
Same type
Related Rotary screw products
Compare the published product information for each manufacturer.
| Catalog ref. | Type | Power | Pressure | Flow | Air quality | Plant | |
|---|---|---|---|---|---|---|---|
 KAISHAN-LGKaishan LG stationary screw air compressors
|
Rotary screw | Selected LG model | Selected duty pressure | Selected flow and reference | — | Kaishan | RFQ |
| LIUTECH-LU-IILU II large two-stage oil-injected screw compressors | Rotary screw | 250–355 kW · overview band | Model-specific duty to be agreed | 45–72 m³/min · overview, not duty row | — | LIUTECH | RFQ |
 SOLLANT-FIXED-SCREWSollant 11 kW rotary screw air compressor
|
Rotary screw | 11 kW | 7–12 bar · selected configuration | Selected-pressure capacity to be agreed | — | Sollant | RFQ |
 HANDE-TWOSTAGE-PMHD-EPM2T two-stage PM variable-speed screw compressors
|
Rotary screw | 37 kW · HD-EPM2T37 example | 0.5 / 0.8 / 1.0 / 1.25 MPa | 6.8 m³/min at 0.8 MPa · HD-EPM2T37 | — | Hande | RFQ |
 GANEY-OGOG / SOGFD air-cooled single-screw compressors
|
Rotary screw | 22 kW · SOGFD22 group | 0.7 / 0.8 / 1.0 / 1.25 MPa | 3.4 m³/min at 0.8 MPa · SOGFD22 | — | Ganey | RFQ |
 AE-APMAPM / APM-S permanent-magnet screw compressors
|
Rotary screw | 37 kW · APM37A / APM37A-S examples | — | Pressure-matched delivery to be agreed | — | Zhongshan AE Machinery | RFQ |
Product information
Information reviewed 2026-10-08. Specifications apply only to the models and conditions stated.
SE-SCREW: Voltage and frequency matter as much as bar. State both. Include the required operating conditions with your enquiry.
Issue RFQ