Oil-free
Sullair DS dry oil-free screw compressors — separate power groups — Hitachi Compressor (Suzhou) — Sullair
Sullair DS dry oil-free screw compressors — separate power groups · Hitachi Compressor (Suzhou) — Sullair
Datasheet
Product overview
Power: 22–120 / 132–160 / 180–450 kW groups · Pressure: 7.0–10.0 / 10.3 bar — group-dependent · Flow: 3.2–81.8 m³/min — separate group limits
DS is the dry oil-free screw family on Sullair's Asian catalog. The page describes a Hitachi-Sullair jointly developed airend with coated rotors and sealing, fixed-speed/VSD arrangements, an IP55 motor and intelligent controller. It is distinct from the site's GS water-injected screw and SRL/VT scroll paths.
The technical tab separates three groups. The 22–120 kW group publishes maximum-pressure selections of 7.0–10.3 bar and a 3.2–21.5 m³/min flow envelope. The 132–160 kW group gives 7.0–10.0 bar and 18.7–30.0 m³/min. The 180–450 kW group gives 7.0–10.3 bar and 26.9–81.8 m³/min, alongside a newer 180–280 kW notation. These are group envelopes, not paired model duty rows. Confirm the exact current selection, flow reference and gauge/absolute pressure basis. Single-stage low-pressure oil-free equipment is mentioned separately, not assigned these two-stage ratings.
The manufacturer claims Class 0, but obtain current issuer documentation, exact model scope and test conditions for the offered machine. Specify the process's purity target, downstream treatment, measurement point and acceptance procedure. Agree electrical supply, controller and actual VSD/fixed-speed selection, package input/load profile, cooling and ambient limits, receiver/dryer/filter scope, maintenance access, commissioning and wear parts. A Class 0 claim is not proof of every contamination target throughout an untreated downstream air system. The original DS110V product image is a family illustration, not a numerical rating of all DS units.
| Catalog reference | SULLAIR-OILFREE |
|---|---|
| Machine | Oil-free |
| Power | 22–120 / 132–160 / 180–450 kW groups |
| Working pressure | 7.0–10.0 / 10.3 bar — group-dependent |
| Published flow | 3.2–81.8 m³/min — separate group limits |
| Air quality | — |
| Duty | Food / pharma |
| Supply | Not specified |
| Plant | Hitachi Compressor (Suzhou) — Sullair |
| Family | DS dry oil-free screw, distinct from GS and SRL/VT |
| Group1 | 22–120 kW; max-pressure selections7.0–10.3bar; flow3.2–21.5m³/min |
| Group2 | 132–160 kW; max-pressure selections7.0–10.0bar; flow18.7–30.0m³/min |
| Group3 | 180–450 kW (newer180–280notation); max-pressure selections7.0–10.3bar; flow26.9–81.8m³/min |
| Group basis | Two-stage fixed-speed/VSD; independent envelopes, not paired model points |
| Actual duty | Current model, pressure/volume reference, electrical supply and package input to obtain |
| Purity | Manufacturer Class0 claim; current issuer/model/test scope required |
| Image | Original DS110V manufacturer product image; family view |
Plant
Hitachi Compressor (Suzhou) — Sullair
Suzhou
The plant remains the seller. This desk issues the English duty sheet so quotes are comparable across clusters.
- SULLAIR-AS-TS · TS315–355: 315–355 kW envelope
- SULLAIR-PORTABLE · Actual engine rating required
Specification pages
Specifying a Oil-free duty
| Duty | Write on the RFQ |
|---|---|
| Compressor for a food factory | Food air is a validation file. Class, test point and treatment matter as much as kW. A general 8 bar screw without papers is not a food quote. |
| Compressor for a pharmaceutical plant | Pharma procurement is a document pack: IQ/OQ support, material certs, residual oil. The machine is the easy part if the RFQ lists the papers. |
| Class 0 oil-free compressor | Class 0 means a stated test method at a stated point in the air system. An oil-free airend without a paper is not Class 0 on this desk. |
Same type
Related Oil-free products
Compare the published product information for each manufacturer.
| Catalog ref. | Type | Power | Pressure | Flow | Air quality | Plant | |
|---|---|---|---|---|---|---|---|
FEIHE-FHOGDWYFeihe water-lubricated oil-free screw — WY / PM / WYH selections
|
Oil-free | Selected PM8F / PM22F: 7.5 / 22 kW | PM examples 0.8 MPa; WYH separately | PM22F 1.1–3.7 m³/min at 0.8 MPa | — | Feihe | RFQ |
CMN-CMPVCMN CM/PV water-lubricated PM VSD screw — cooling variants
|
Oil-free | Selected CM22PV:22 kW; table examples7.5–315 kW | CM22PV rows:0.8 / 1.0 / 1.25 MPa | CM22PV:1.40–3.50 m³/min at0.8 MPa | — | CMN | RFQ |
HENGDA-LP-SEMIHengda ZW, VW and double-machine low-pressure semi-oil-free series
|
Oil-free | — | — | — | — | Hengda | RFQ |
HITACHI-DSP-NEXT2Hitachi DSP NEXT II — 90A and 110W catalogue examples
|
Oil-free | 90A: 90 kW; 110W: 110 kW motor | 0.75 / 0.86 / 1.0 MPaG | 90A: 16.4 / 13.9 / 13.4 m³/min | — | Hitachi IEC | RFQ |
HANDE-OILFREEHD-DSPM dry screw and Hande oil-free equipment
|
Oil-free | 90 kW · HD-DSPM90 example | 0.8 MPa (8 bar) · HD-DSPM90 | 14.9 m³/min · HD-DSPM90 | — | Hande | RFQ |
AE-OILFREE-SCREWAOF / AOFM dry oil-free screw compressors
|
Oil-free | 55 kW · AOF55 / AOFM55 examples | — | Delivery at agreed pressure / reference basis | — | Zhongshan AE Machinery | RFQ |
Product information
Information reviewed 2026-10-08. Specifications apply only to the models and conditions stated.
SULLAIR-OILFREE: Voltage and frequency matter as much as bar. State both. Include the required operating conditions with your enquiry.
Issue RFQ