Rotary screw
AA single-stage screw air-ends — Hanbell Precise Machinery
AA single-stage screw air-ends · Hanbell Precise Machinery
Datasheet
Product overview
AA single-stage screw air-ends from Hanbell Precise Machinery
Hanbell AA is an ordinary-pressure, single-stage screw air-end family for integration into an air-compressor package. The air-end is the compression component; the package builder selects the motor, transmission, cooling, lubrication and control equipment for the required system duty.
The published AA table is measured at 8 bar.g and distinguishes reference motor power from shaft power. For example, AA-780R is listed with a 75 kW reference motor, 2,950 rpm, 11.9 m³/min air flow and 73.3 kW shaft power. AA-1200R is listed with a 110 kW reference motor, 2,950 rpm, 19.4 m³/min and 115.5 kW shaft power. These figures should be used as separate selection inputs rather than treated as interchangeable electrical ratings.
The table spans belt-driven AA-077 entries through larger AA models. Speed and drive arrangement change the duty: the two AA-077 belt entries use different speeds and air flows. Select the exact air-end and transmission before specifying a motor or estimating package performance.
For integration or replacement, include the AA model, required pressure and flow, motor and drive arrangement, running speed, oil circuit and cooling conditions. The values below are manufacturer-listed air-end data at the stated pressure, rather than a performance guarantee for an assembled compressor package.
| Catalog reference | HANBELL-AA |
|---|---|
| Machine | Rotary screw |
| Power | — |
| Working pressure | — |
| Published flow | — |
| Air quality | — |
| Duty | General industry |
| Supply | Not specified |
| Plant | Hanbell Precise Machinery |
| Component | Ordinary-pressure single-stage screw air-end |
| Table condition | 8 bar.g |
| AA-077 belt / 7.5 kW reference motor | 3420 rpm; air flow 1.0 m³/min; shaft power 7.3 kW |
| AA-077 belt / 11 kW reference motor | 5200 rpm; air flow 1.5 m³/min; shaft power 11.0 kW |
| AA-130 belt / 15 kW reference motor | 3420 rpm; air flow 2.0 m³/min; shaft power 14.6 kW |
| AA-240 / 22 kW reference motor | 2950 rpm; air flow 3.5 m³/min; shaft power 22.7 kW |
| AA-420 / 37 kW reference motor | 2950 rpm; air flow 6.2 m³/min; shaft power 38.2 kW |
| AA-600R / 55 kW reference motor | 2950 rpm; air flow 9.1 m³/min; shaft power 57.6 kW |
| AA-780R / 75 kW reference motor | 2950 rpm; air flow 11.9 m³/min; shaft power 73.3 kW |
| AA-1200R / 110 kW reference motor | 2950 rpm; air flow 19.4 m³/min; shaft power 115.5 kW |
| AA-1560 / 160 kW reference motor | 2950 rpm; air flow 23.9 m³/min; shaft power 151.6 kW |
| AA-2600 / 250 kW reference motor | 2950 rpm; air flow 40.7 m³/min; shaft power 260.6 kW |
| AA-5600G / 355 kW reference motor | 1450 rpm; air flow 60.0 m³/min; shaft power 376.0 kW |
| Selection scope | Air-end data; complete-package input power and performance require the selected drive and system configuration |
Plant
Hanbell Precise Machinery
Shanghai
The plant remains the seller. This desk issues the English duty sheet so quotes are comparable across clusters.
Specification pages
Specifying a Rotary screw duty
| Duty | Write on the RFQ |
|---|---|
| How to specify an air compressor | If the RFQ only says “compressor, China”, a plant cannot price it. Start with architecture, then the duty point, then the papers. |
| 75 kW 8 bar rotary screw compressor | 75 kW at 8 bar(g) is a common plant-air point. FAD is not a brochure range — it is the flow at that pressure, after the cooler, for the voltage you actually run. |
| 110 kW 10 bar rotary screw compressor | 10 bar(g) is not 8 bar with a different sticker. FAD falls as pressure rises. Write 110 kW and 10 bar together, then the flow you need at that point. |
Same type
Related Rotary screw products
Compare the published product information for each manufacturer.
| Catalog ref. | Type | Power | Pressure | Flow | Air quality | Plant | |
|---|---|---|---|---|---|---|---|
 KAISHAN-LGKaishan LG stationary screw air compressors
|
Rotary screw | Selected LG model | Selected duty pressure | Selected flow and reference | — | Kaishan | RFQ |
| LIUTECH-LU-IILU II large two-stage oil-injected screw compressors | Rotary screw | 250–355 kW · overview band | Model-specific duty to be agreed | 45–72 m³/min · overview, not duty row | — | LIUTECH | RFQ |
 SOLLANT-FIXED-SCREWSollant 11 kW rotary screw air compressor
|
Rotary screw | 11 kW | 7–12 bar · selected configuration | Selected-pressure capacity to be agreed | — | Sollant | RFQ |
 HANDE-TWOSTAGE-PMHD-EPM2T two-stage PM variable-speed screw compressors
|
Rotary screw | 37 kW · HD-EPM2T37 example | 0.5 / 0.8 / 1.0 / 1.25 MPa | 6.8 m³/min at 0.8 MPa · HD-EPM2T37 | — | Hande | RFQ |
 GANEY-OGOG / SOGFD air-cooled single-screw compressors
|
Rotary screw | 22 kW · SOGFD22 group | 0.7 / 0.8 / 1.0 / 1.25 MPa | 3.4 m³/min at 0.8 MPa · SOGFD22 | — | Ganey | RFQ |
 AE-APMAPM / APM-S permanent-magnet screw compressors
|
Rotary screw | 37 kW · APM37A / APM37A-S examples | — | Pressure-matched delivery to be agreed | — | Zhongshan AE Machinery | RFQ |
Product information
Information reviewed 2026-09-28. Specifications apply only to the models and conditions stated.
HANBELL-AA: Voltage and frequency matter as much as bar. State both. Include the required operating conditions with your enquiry.
Issue RFQ