Rotary screw

N-series two-stage PM variable-speed screw compressors — Wuxi Xiya

N-series two-stage PM variable-speed screw compressors · Wuxi Xiya

N-series two-stage PM variable-speed screw compressors — official catalog illustration
N-series two-stage PM variable-speed screw compressors — manufacturer catalog illustration

Datasheet

Product overview

Power: 110 / 132 kW named examples · Pressure: 8 / 10 bar gauge paired entries · Flow: 19.9–26.5 m³/min across stated entries

Xiya's N-series two-stage oil-injected table explicitly identifies permanent-magnet variable-speed machines with air-cooled FMS and water-cooled WMS arrangements. At 110 kW, N110FMS lists 21.8 m³/min at 0.8 MPa gauge and 19.9 at 1.0 MPa gauge. N110WMS lists the same flow pair and 11 m³/h cooling water. Both 110 kW entries list 3200 × 1750 × 1950 mm and 3600 kg. N132FMS is 132 kW with 26.5/23.8 m³/min at the same pressure pair.

Keep cooling suffix and pressure matched to the performance row. The published motor power is not total package input, and a maximum flow is not a minimum-load control guarantee. Supply the shift demand profile and request useful delivery, electrical input and control behaviour at the actual operating points. Confirm cooling-water temperature/quality/pressure for WMS or ventilation and heat discharge for FMS.

The product introduction describes alarm and start/stop, delayed stop after unloading, motor overload, abnormal stage-pressure and high-temperature protection. Agree offered control functions, settings, interfaces and sequencing with existing machines. IP55 appears in the table's PM VSD arrangement notes; confirm component and enclosure protection for the actual site rather than extending it to every part.

Define downstream dryer/filters, receiver, point-of-use quality and condensate handling. Request offer-specific dimensions/service drawings and model/serial-linked performance tests, destination documentation, commissioning and consumables/parts responsibility. Two stages and permanent-magnet control do not by themselves guarantee a fixed saving for the buyer's plant.

Catalog referenceXIYA-PM
MachineRotary screw
Power110 / 132 kW named examples
Working pressure8 / 10 bar gauge paired entries
Published flow19.9–26.5 m³/min across stated entries
Air quality—
DutyGeneral industry
SupplyNot specified
PlantWuxi Xiya
{"N110FMS""110kW;21.8m³/min@8barg /19.9@10barg;air-cooled", "N110WMS": "110kW;same pressure-matched flow;11m³/h cooling water", "N132FMS": "132kW;26.5m³/min@8barg /23.8@10barg", "110kW example dimensions/weight": "3200×1750×1950mm;3600kg", "Controls": "Two-stage permanent-magnet variable speed; agreed alarms/protection", "Selection": "Demand profile,total input,capacity reference and actual site conditions"}

Plant

Wuxi Xiya

Wuxi

The plant remains the seller. This desk issues the English duty sheet so quotes are comparable across clusters.

Specification pages

Specifying a Rotary screw duty

All spec pages
DutyWrite on the RFQ
Compressor for CNC machines Machine tools need dry, stable 7–8 bar air. Size from the cell, not from a round kW number a vendor likes to sell.
How to specify an air compressor If the RFQ only says “compressor, China”, a plant cannot price it. Start with architecture, then the duty point, then the papers.
75 kW 8 bar rotary screw compressor 75 kW at 8 bar(g) is a common plant-air point. FAD is not a brochure range — it is the flow at that pressure, after the cooler, for the voltage you actually run.

Same type

Related Rotary screw products

Compare the published product information for each manufacturer.

Full Rotary screw list
Catalog ref.TypePowerPressureFlowAir qualityPlant
KAISHAN-LG Kaishan LG stationary screw air compressors KAISHAN-LGKaishan LG stationary screw air compressors Rotary screw Selected LG model Selected duty pressure Selected flow and reference — Kaishan RFQ
LIUTECH-LU-IILU II large two-stage oil-injected screw compressors Rotary screw 250–355 kW · overview band Model-specific duty to be agreed 45–72 m³/min · overview, not duty row — LIUTECH RFQ
SOLLANT-FIXED-SCREW Sollant 11 kW rotary screw air compressor SOLLANT-FIXED-SCREWSollant 11 kW rotary screw air compressor Rotary screw 11 kW 7–12 bar · selected configuration Selected-pressure capacity to be agreed — Sollant RFQ
HANDE-TWOSTAGE-PM HD-EPM2T two-stage PM variable-speed screw compressors HANDE-TWOSTAGE-PMHD-EPM2T two-stage PM variable-speed screw compressors Rotary screw 37 kW · HD-EPM2T37 example 0.5 / 0.8 / 1.0 / 1.25 MPa 6.8 m³/min at 0.8 MPa · HD-EPM2T37 — Hande RFQ
GANEY-OG OG / SOGFD air-cooled single-screw compressors GANEY-OGOG / SOGFD air-cooled single-screw compressors Rotary screw 22 kW · SOGFD22 group 0.7 / 0.8 / 1.0 / 1.25 MPa 3.4 m³/min at 0.8 MPa · SOGFD22 — Ganey RFQ
AE-APM APM / APM-S permanent-magnet screw compressors AE-APMAPM / APM-S permanent-magnet screw compressors Rotary screw 37 kW · APM37A / APM37A-S examples — Pressure-matched delivery to be agreed — Zhongshan AE Machinery RFQ

XIYA-PM: Voltage and frequency matter as much as bar. State both. Include the required operating conditions with your enquiry.

Issue RFQ