Huitong Xinda laser-cutting screw — HD pressure and treatment interface — Qingdao Huitong Xinda Air Compressor

Datasheet

Product overview

Power: HD model rows:11/15/22 kW · Pressure: 1.3 or 1.6 MPa by model · Flow: HD-11:1.4 or 1.2 m³/min respectively

The manufacturer's laser-cutting air-compressor category presents 11–22 kW equipment. Its numerical table names HD models, although the introductory paragraphs refer to XD and XV. Confirm the offered model and whether its control is fixed-speed or variable-speed; the paragraphs do not establish one consistent control specification for every tabulated HD row.

HD-11/13G lists 11 kW, 1.4 m³/min and 1.3 MPa. HD-11/16G lists the same power, 1.2 m³/min and 1.6 MPa. At 15 kW, HD-15/13G and HD-15/16G give 1.7 and 1.5 m³/min respectively. The 22 kW HD-22/13G and HD-22/16G rows give 3.0 and 2.6 m³/min at their respective 1.3 and 1.6 MPa discharge pressures. These are distinct pressure-linked ratings, with an incompletely stated flow reference, rather than independent guaranteed FAD test results.

Electrical options are printed as 380 V/50 Hz, 220 V/60 Hz, 415 V and custom voltage; agree phase/frequency on the order. The dimension, weight and outlet rows use merged group cells. Request the selected model's exact cabinet, mass and connection drawing rather than assigning a merged cell without confirmation. The page describes direct drive and compact maintenance access, but does not supply a cutting-machine cleanliness acceptance specification or a complete treatment bill of materials.

Provide the laser-machine air interface, required pressure during cutting, peak/average demand, nozzle/process conditions, operating hours and existing receiver/network. Agree allowable water, oil and particle contamination and the drying/filtration arrangement, including losses between compressor discharge and the machine. Compressor supply is not a complete nitrogen generator or a guarantee of cut quality for every material or laser setting.

Compare capacity and package input at the required delivered pressure, then agree treatment/receiver scope, drainage, controls/interlocks, electrical protection and installation/service access. Request manuals, maintenance consumables and pressure/air-quality acceptance records, with commissioning, warranty and destination-support terms. The complete official laser-category photograph is a manufacturer range example; an energy label or cabinet appearance does not independently establish the quoted performance.

Catalog reference	HTXD-LASER
Machine	PET / HP
Power	HD model rows:11/15/22 kW
Working pressure	1.3 or 1.6 MPa by model
Published flow	HD-11:1.4 or 1.2 m³/min respectively
Air quality	—
Duty	PET / blowing
Supply	Not specified
Plant	Qingdao Huitong Xinda Air Compressor
Category	Laser-cutting screw air compressor
HD-11/13G	11 kW;1.4 m³/min;1.3 MPa
HD-11/16G	11 kW;1.2 m³/min;1.6 MPa
HD-15/13G	15 kW;1.7 m³/min;1.3 MPa
HD-15/16G	15 kW;1.5 m³/min;1.6 MPa
HD-22/13G	22 kW;3.0 m³/min;1.3 MPa
HD-22/16G	22 kW;2.6 m³/min;1.6 MPa
Control clarification	HD table versus XD/XV paragraphs;offered configuration to agree
Electrical	380 V/50 Hz;220 V/60 Hz;415 V/custom;phase to confirm
Acceptance	Delivered pressure,flow reference and water/oil/particle limits
Scope	Dryer,filters,receiver,drains and controls to agree separately